CleanAHull Ultrasonic Antifouling System
CleanAHull Trasnducer and FootprintCLHUQ-KEY

Ultrasonic Antifouling CleanAHull Quad – 4CH

AUD $ 1,949.00

What system is right for your boat? Use the Product Selector to find out.

SKU: CLHUQ Category:

Product Description

The CleanaHull Ultrasonic Antifouling protection system utilises industry leading technology and the latest in-house developed transducer technology. By emitting multiple very specific frequency bursts through a vast range of frequencies the system protects the hull from algal growth and barnacles

The Ultrasonic sound waves emitted through the hull create a environment of microscopic cavitation bubbles. These bubbles cause a very unique environment  in the immediate vicinity of the hull when the microscopic bubbles implode, splitting the sidewall of single cell microscopic organisms such as algae. The cavitation has the added benefit of a scrubbing effect helping keep the hull clean. The removal of the initial algae growth inhibits the food chain for further growth of barnacles and other marine life that feed on the algae, effectively producing an environment that is inhabitable by algae and barnacles.

Suitable for all types of hull materials except wood.

Package Contents

  • 1 x CleanAHull Quad control Module with 5m Battery Cable
  • 4 x Transducer Mounting Footprints
  • 4 x Ultrasonic Transducers each with 10m of transducer cable
  • 1 x JB-Weld Bonding Epoxy Adhesive
  • 1 x Loctite 515
  • 1 x Installation Instructions / Manual Booklet
  • 1 x In-Line Fuse Holder
  • 1 x Package of spare fuses

 

 

CleanAHull Control Module

The Central Brains of the system, provides power to the Transducers. The CleanAHull system provides live status on the built in LCD display.

CleanAHull Transducer 50W Peak

In-House developed transducer for vastly improved output. The Transducers are installed in strategic locations on the inside of the hull and drive the Ultrasonic Output Into the hull.

CleanAHull Transducer Mounting Footprint

The CleanAHull system comes with these helpful mounting footprints, these footprints provide a simple mounting proceedure and servicable transducers. Alternatively Transducers can be installed by bonding directly in place.

JB Weld Epoxy Adhesive

JB-Weld Epoxy is the perfect bonding agent for the hull, works well with GPR, Aluminium and Steel! The JB Weld provides the best bond for ultimate transference of the Ultrasonic Signal.

Multiple Input Voltage

Loctite 515 Cyanoacrylate provides the perfect medium for transference of the Ultrasonic Signal through into the Footprint. To be used between the footprint and the Transducer if the Footprint is used.

Fuse Holder

We Provide the In-Line fuse to make installation simpler. This can be used where required. We also provide the appropriate fuse to go into this holder.

 

Additional Information

Product Certifications

FCC & C-Tick

Product Code

CLHUQ

Weight

5kg

Manufacturer

Globatech Australia

Product Name

CleanAHull Quad

Voltage

12VDC – 24VDC

Power

10 – 16 Watts

Control Module

1 Piece

Transducers

4 x 50W Hull Transducers

Control Module Rating

IP65

Transducer Rating

IP68

Transducer Cable Length

10m each

Power Cable Length

5m

Warranty

2 Years

Dimensions

201mm x 121mm x 55mm

Reviews

There are no reviews yet.

Be the first to review “Ultrasonic Antifouling CleanAHull Quad – 4CH”